71
Axxess® Model 8690 User Guide – ITP Mode
MOVING ON
PERFORMING A “HOOKFLASH” DURING A CALLCertain telephone service companies may require a timed hookflash (a quick hang up
and release).
To generate a hookflash while using a line:
EITHER, Press the FLASH menu button. If the FLASH menu button is not visible,
press MORE until you see FLASH.
OR, Press and dial .
USING ACCOUNT CODESIf your telephone system is programmed to use the Station Message Detail Recording
(SMDR) feature, you might be required to enter account codes when you place a call.
These codes add information to telephone record reports that the system will periodi-
cally print.
There are three types of account codes:
• Standard account codes are automatically entered into the SMDR report when-
ever you place a call.
• Forced account codes must be dialed before you can place an outside call.
• Optional account codes can be entered at any time during a call.
NOTE: Your system administrator can tell you which types of account codes are used
on your telephone system.
To enter an optional account code:
1. Press and dial .
2. Enter the optional account code. If the account code is not immediately accepted,
press .
To set an account code for all calls placed from your endpoint:
Dial and then the account code. If the account code is not immediately
accepted, press . This code will be used for all calls made from your endpoint
until it is disabled.
To disable the code:
Dial and press .
3 3 0
3 9 0
#
3 9 1
#
3 9 1
#