Panel Mounting
Follow the steps below to mount the industrial switch with the Panel mount plate.
1.Remove the
2.Place the wall Panel plate on the rear of the industrial switch.
3.Use the screws to attach the Panel plate to the industrial switch
4.Use the hook holes at the corners of the panel mount plate to attach the industrial switch to the panel.
5.To remove the panel mount plate, reverse steps above
Manual Documentation Number: | 13 |
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353
