Switch Settings
Used to assign the system name, location and to view system information
System Name: Assigns a name to the switch. The maximum length is 64 bytes
System Location: Assigns a physical location for the switch. The maximum length is 64 bytes
System Description: Displays the description of switch. This is read only and cannot be modified
Firmware Version: Displays the firmware version
Kernel Version: Displays the kernel software version
Hardware version: Display the hardware version
MAC Address: Display the unique hardware address assigned by manufacturer (this value is different for each switch)
Switch settings interface
[NOTE] If the configuration is not saved, it will be lost when the switch is powered off.
[NOTE] The Firmware, Hardware, and Kernel versions listed above are current as of the date this manual was produced.
Manual Documentation Number: | 23 |
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353
