Hardware Installation
.
1.Unpack the Industrial switch.
2.Ensure the
3.Apply power to the switch (refer to the Wiring the Power Inputs section). The power LED will light.
4.Connect CAT 5 cables to the Industrial switch’s
[NOTE] If the network devices do not support MID/MDIX, a crossover cable may be required.
5.Connect the fiber optic cables to the industrial switch and network device. Ensure that the switch’s fiber optic transmitter is connected to the network devices receiver and vice versa.
6.When all the connections are made and the LEDs show normal indications, the installation is complete.
14 | Manual Documentation Number: | |
| ||
| B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph | |
| B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 | – Fax +353 |
