„Hello Time (1-10):The time that the control switch sends out a BPDU packet to check RSTP status. Enter a value between 1 and 10.

„Forward Delay Time (4-30):The number of seconds a port waits before changing from its Rapid Spanning-Tree Protocol learning and listening states to the forwarding state. Enter a value between 4 through 30.

„Click Apply

[NOTE]

1.Use the following rule to configure the MAX Age, Hello Time, and Forward Delay Time.

2 x (Forward Delay Time value –1) > = Max Age value >= 2 x (Hello Time value +1)

If the configuration is not saved it will be lost when the switch is powered off.

RSTP– System Configuration Interface

Manual Documentation Number: EIR505-xx_5107m

37

B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104www.bb-elec.com

B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445www.bb-europe.com

Page 47
Image 47
B&B Electronics EIR505-XX manual RSTP- System Configuration Interface