Port Control
Used to set up the port.
1.Select the port by scrolling down the Port column. The current port information will be displayed in the table below.
2.State: Enables or disables the port.
3.Negotiation: Sets the negotiation mode to Auto, Nway (specify the speed/duplex of the port and enable
4.Speed: Sets the transmit speed of the port
5.Duplex: Sets the port to
6.Flow control: Sets flow control function to Symmetric or Asymmetric in Full Duplex mode(The default value is Disable)
7. Click the
Apply 
button to apply configurations
8. Select the port again to verity the configuration.
[NOTE] If the configuration is not saved it will be lost when the switch is powered off.
Port Control interface
22 | Manual Documentation Number: | |
| ||
| B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph | |
| B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 | – Fax +353 |
