B&B Electronics EIR510-2SC-T, EIR510-2MT-T, EIR510-2MC-T manual Enable Disable

		giga ports,
		and zero means no
		limit.
			switch(config)#interface
bandwidth out		Set interface output
[Value]		bandwidth. Rate	fastEthernet 2
		Range is from 100	switch(config-if)#bandwidth out
		kbps to 102400 kbps	100
		or to 256000 kbps for
		giga ports,
		and zero means no
		limit.
			switch(config)#interface
show bandwidth	I	Show interfaces
		bandwidth control	fastEthernet 2
			switch(config-if)#show bandwidth
			switch(config)#interface
state	I	Use the state interface
[Enable Disable]		configuration	fastEthernet 2
		command to specify	(config-if)#state Disable
		the state mode of
		operation for Ethernet
		ports. Use the disable
		form of this command
		to disable the port.
			switch(config)#interface
show interface	I	show interface
configuration		configuration status	fastEthernet 2
			switch(config-if)#show interface
			configuration
			switch(config)#interface
show interface status	I	show interface actual
		status	fastEthernet 2
			(config-if)#show interface status
			switch(config)#interface
show interface	I	show interface statistic
accounting		counter	fastEthernet 2
			(config-if)#show interface
			accounting
Manual Documentation Number: EIR510-xSFP-T_0708m			27

B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com

B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com