B&B Electronics EIR510-2MT-T, EIR510-2MC-T manual Rapid Spanning Tree, Rstp System Configuration

Group Configuration interface

Rapid Spanning Tree

The Rapid Spanning Tree Protocol (RSTP) is an evolution of Spanning Tree Protocol (STP). It provides a faster spanning tree convergence after a topology change. The switch will auto detect a device that is running STP or RSTP protocol.

RSTP System Configuration

„ RSTP state can be modified. After modification, click Apply

¾RSTP mode: Enable or disable the RSTP.

¾Priority (0-61440):a value used to identify the root bridge. The bridge with the lowest value has the highest priority and is selected as the root. If the value changes, the switch must be rebooted. The value must be multiple of 4096.

¾Max Age (6-40): The number of seconds a bridge waits without receiving Spanning-tree Protocol configuration messages before attempting a reconfiguration. Enter a value between 6 through 40

¾Hello Time (1-10): The time that controls when, the switch sends

out the BPDU packet to check RSTP status. Enter a value between

Manual Documentation Number: EIR510-xSFP-T_0708m 73

B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com

B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com