B&B Electronics EIR510-2MT-T, EIR510-2MC-T manual Spanning Tree Commands Set, ~61440, Seconds

hybrid-link untag		VLAN by trunk group	hybrid-link untag 4 tag 3,6,8
[UntaggedVID]			or
tag
[TaggedVID List]			switch(vlan)#vlan 8021q trunk 3
			hybrid-link untag 5 tag 6-8
			switch(vlan)#show vlan 23
show vlan [GroupID]	V	Show VLAN
or		information
show vlan
			switch(vlan)#no vlan group 2
no vlan group	V	Delete port base group
[GroupID]		ID

Spanning Tree Commands Set

Commands	Level	Description	Example
spanning-tree enable	G	Enable spanning tree	switch(config)#spanning-tree
			enable
			switch(config)#spanning-tree
spanning-tree priority	G	Configure spanning
[0~61440]		tree priority parameter	priority 32767
			switch(config)#spanning-tree
spanning-tree max-age	G	Use the spanning-tree
[seconds]		max-age global	max-age 15
		configuration
		command to change
		the interval between
		messages the
		spanning tree receives
		from the root switch. If
		a switch does not
		receive a bridge
		protocol data unit
		(BPDU) message from
		the root switch within
		this interval, it
		recomputed the
		Spanning Tree
		Protocol (STP)
		topology.

Manual Documentation Number: EIR510-xSFP-T_0708m		31
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax	815-433-5104 – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444	– Fax +353 91-792445 – www.bb-europe.com