B&B Electronics EIR510-2MC-T Spanning-tree, Hello-time seconds, Forward-time seconds, ~200000000

spanning-tree	G	Use the spanning-tree	switch(config)#spanning-tree
hello-time [seconds]		hello-time global	hello-time 3
		configuration
		command to specify
		the interval between
		hello bridge protocol
		data units (BPDUs).
			switch(config)#spanning-tree
spanning-tree	G	Use the spanning-tree
forward-time [seconds]		forward-time global	forward-time 20
		configuration
		command to set the
		forwarding-time for the
		specified
		spanning-tree
		instances. The
		forwarding time
		determines how long
		each of the listening
		and learning states
		last before the port
		begins forwarding.
			switch(config)#interface
stp-path-cost	I	Use the spanning-tree
[1~200000000]		cost interface	fastEthernet 2
		configuration	switch(config-if)#stp-path-cost 20
		command to set the
		path cost for Spanning
		Tree
		Protocol (STP)
		calculations. In the
		event of a loop,
		spanning tree
		considers the path
		cost when selecting
		an interface to place

32	Manual Documentation Number: EIR510-xSFP-T_0708m
	B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
	B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com