B&B Electronics EIR510-2MT-T, EIR510-2MC-T manual Sntp Commands Set, Start time End time, Minute

no event systemlog	I	Disable port event for	switch(config)#interface
		system log	fastethernet 3
			switch(config-if)#no event
			systemlog
			switch(config)#interface
no event smpt	I	Disable port event for
		SMTP	fastethernet 3
			switch(config-if)#no event smtp
			switch#show systemlog
show systemlog	P	Show system log client
		& server information

SNTP Commands Set

Commands	Level	Description	Example
sntp enable	G	Enable SNTP function	switch(config)#sntp enable
			switch(config)#sntp daylight
sntp daylight	G	Enable daylight saving
		time, if SNTP function
		is inactive, this
		command can’t be
		applied.
			switch(config)# sntp
sntp daylight-period	G	Set period of daylight
[Start time] [End time]		saving time, if SNTP	daylight-period 20060101-01:01
		function is inactive,	20060202-01-01
		this command can’t be
		applied.
		Parameter format:
		[yyyymmdd-hh:mm]
			switch(config)#sntp
sntp daylight-offset	G	Set offset of daylight
[Minute]		saving time, if SNTP	daylight-offset 3
		function is inactive,
		this command can’t be
		applied.
			switch(config)#sntp ip 192.169.1.1
sntp ip	G	Set SNTP server IP, if
[IP]		SNTP function is
		inactive, this command

Manual Documentation Number: EIR510-xSFP-T_0708m		43
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax	815-433-5104 – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444	– Fax +353 91-792445 – www.bb-europe.com