Instruction 24-94484-24
Operation
6. A fter the Found New Hardware Wizard has finished installing the
software, click Finish to close the Wizard.
4.14.3 Recovering DataBefore data can be recovered from the analyzer, install the PCA 2 Data
Recovery Program, USB cable, and USB device driver as described in Sec-
tions 4.14.1 and 4.14.2.
Recover either the logging or combustion data as follows:
1. Sta rt the program by either double-clicking the PCA2 icon
on the Windows desktop, or clicking the PCA2 shortcut in
start menu. The “Bacharach PCA 2 Data Recovery Program”
window should appear.
Observe that the window is divided into two sections. The left-hand
section is used to recover logging data, while combustion data is recov-
ered from the right-hand section.
In the following steps, the logging data will be recovered. The same
procedure can be used to recover combustion data using the right-hand
section of the window.
2. Select where the downloaded file containing the recovered data will be
located and give it a filename by clicking the Open Log File button. The
following example screens show that the downloaded file will be placed
into a pre-existing PCA2 Logging Data folder and given the filename
Customer XYZ.