Calibration

If the sensor’s output is too low to be usable, then the message “Bad Calibration Sensor End of Life, Entry Not Saved” will appear. The sen- sor will now be marked as being BAD in the DIAGNOSTICS screen.

NOTE: H2 calibration can be bypassed by pressing the ESC button, after which the CALIBRATION LIST screen is re-dis- played. Skip to Step 10 if the ESC button was pressed.

6.Turn OFF the regulator of calibration fixture and remove the CO cylinder.

7.Attach a combination 1,000 ppm CO and 1,000 ppm H2 cylinder to the regulator of the calibration fixture, and then use the and buttons to enter an Applied value that exactly equals the CO concentration stamped on the cylinder.

TEST GAS CO/H2

Enter CO VALUE 1000 PPM

8.Adjust the regulator for a flowmeter indica- tion of approximately 2 SCFH, and then press ENT to display the CALIBRATE H2 screen.

06/27/06 11:55:30 PM PRINT

F1 F2 F3

The calibration range is from 400 to 1,500 ppm. An attempt to cali- brate outside this range will cause the message “Bad Calibration Wrong CAL Entry” to appear in the following step.

9.Wait until the Measured reading stabilizes (approximately 3 minutes), and then press ENT to calibrate the H2 Measured value to that of the Applied value; after which the message “Good Calibration” should briefly appear followed by the CALIBRATION LIST screen being re-displayed.

CALIBRATE H2

Measured 1000 PPM Applied 1000 PPM

If the sensor’s output is low, but still usable, then the message “Good Calibration WARNING Low Sensor” will appear. The sensor will now be marked as being Low in the DIAGNOSTICS screen.

06/27/06 11:55:30 PM PRINT

F1 F2 F3

If the sensor’s output is too low to be usable, then the message “Bad Calibration Sensor End of Life” will appear followed by the CALIBRATION LIST screen being re-displayed. The sensor will now be marked as being BAD in the DIAGNOSTICS screen.

10. Turn OFF the regulator and remove the gas cylinder.

Instruction 24-9448

5-9

Page 74 Page 76
Page 75
Image 75
Bacharach 24-9448 manual Turn OFF the regulator and remove the gas cylinder
Page 74 Page 76

24-9448 specifications

The Bacharach 24-9448 is a sophisticated instrument designed for detecting and measuring hazardous gases, particularly in environmental and industrial settings. Renowned for its accuracy and reliability, this portable gas analyzer serves a crucial role in ensuring safety and compliance in various applications, including HVAC, refrigeration, and environmental monitoring.

One of the standout features of the 24-9448 is its advanced sensor technology. The device utilizes electrochemical sensors that provide real-time readings of specific gas concentrations, including carbon monoxide, carbon dioxide, and other toxic gases. These sensors are designed to be sensitive and selective, ensuring they deliver precise measurements without interference from other substances in the environment. This is particularly important in industrial settings where multiple gases may be present.

The Bacharach 24-9448 also boasts a user-friendly interface with a clear display that makes it easy for operators to interpret results quickly. The unit features a simple menu navigation system, allowing users to access different functions without hassle. This design consideration enhances usability, especially in high-pressure situations where every second counts.

Portability is another key characteristic of the 24-9448. Weighing in at just a few pounds, it is easy to transport and operate in various locations, whether it be on a job site or in an environmental monitoring scenario. The robust housing is designed to withstand the rigors of fieldwork, ensuring longevity and durability despite challenging conditions.

Moreover, the device includes data logging capabilities, enabling users to store and later review measurements. This feature is essential for compliance documentation and for analyzing trends over time. Users can download data for further analysis, aiding in thorough reporting and decision-making processes.

In addition to its core capabilities, the Bacharach 24-9448 offers flexibility with adjustable calibration settings, accommodating different gas types and concentration ranges. This adaptability ensures it can meet the specific needs of diverse applications, making it a versatile tool in the field.

Overall, the Bacharach 24-9448 is an essential instrument for professionals in various sectors. Its combination of advanced sensor technology, user-friendly design, portability, and data logging capabilities solidifies its position as a leading choice for gas detection and measurement. Whether for routine checks or emergency responses, this analyzer provides the reliability that ensures safety in potentially hazardous environments.
Top Page Image Contents