Manuals / Bacharach / Household Appliance / Carbon Monoxide Alarm

Bacharach 24-9448 manual SO2 Sensor Calibration

Models: 24-9448

1 108
Download 108 pages 37.05 Kb
Page 76
Image 76
CALIBRATE SO2
Measured 98 PPM
Applied 100 PPM
06/28/06 11:55:30 PM PRINT

Calibration

5.7 SO2 Sensor Calibration

This procedure spans the optional sulfur dioxide sensor to a known gas level.

Material Required:

• Calibration Kit, P/N 24-7059

• Gas Cylinder: 100 ppm SO2 in Nitrogen, P/N 24-1158

Procedure:

1.If not already done, turn ON the analyzer and display the CALIBRATION LIST screen per Section 5.2.

2.Use the buttons to highlight SO2, and then press ENT to display the CALIBRATE SO2 screen.

“Measured” is the current SO2 reading, while “Applied” is a known SO2 level that will be applied for calibration purposes.

3.Attach a 100 ppm SO2 cylinder to the regu- lator of the calibration fixture shown in Figure 5-2on Page 5-14.

4.Use the and buttons to enter an Applied value that exactly equals the concen- tration stamped on the SO2 cylinder.

The calibration range is from 9 to 150 ppm. An attempt to calibrate outside this range will cause the message “Bad Calibration Wrong CAL Entry” to appear in the following step.

CALIBRATION LIST

Pressure

T-Stack

T-Air

CO-LO

SO2

NO

NO2

(more)

MENU

F1 F2 F3

5. Adjust regulator for a flowmeter indication

of approximately 2 SCFH. Wait until the F1 F2 F3 Measured reading stabilizes (approximately

3 minutes), and then press ENT to calibrate the SO2 Measured value to that of the Applied value. The message “Good Calibration” should briefly appear followed by the CALIBRATION LIST screen being re-displayed.

If the sensor’s output is low, but still usable, then the message “Good Calibration WARNING Low Sensor” will appear. The sensor will now be marked as being Low in the DIAGNOSTICS screen.

5-10

Instruction 24-9448

Page 75 Page 77
Page 76
Image 76
Bacharach 24-9448 manual SO2 Sensor Calibration
Page 75 Page 77

24-9448 specifications

The Bacharach 24-9448 is a sophisticated instrument designed for detecting and measuring hazardous gases, particularly in environmental and industrial settings. Renowned for its accuracy and reliability, this portable gas analyzer serves a crucial role in ensuring safety and compliance in various applications, including HVAC, refrigeration, and environmental monitoring.

One of the standout features of the 24-9448 is its advanced sensor technology. The device utilizes electrochemical sensors that provide real-time readings of specific gas concentrations, including carbon monoxide, carbon dioxide, and other toxic gases. These sensors are designed to be sensitive and selective, ensuring they deliver precise measurements without interference from other substances in the environment. This is particularly important in industrial settings where multiple gases may be present.

The Bacharach 24-9448 also boasts a user-friendly interface with a clear display that makes it easy for operators to interpret results quickly. The unit features a simple menu navigation system, allowing users to access different functions without hassle. This design consideration enhances usability, especially in high-pressure situations where every second counts.

Portability is another key characteristic of the 24-9448. Weighing in at just a few pounds, it is easy to transport and operate in various locations, whether it be on a job site or in an environmental monitoring scenario. The robust housing is designed to withstand the rigors of fieldwork, ensuring longevity and durability despite challenging conditions.

Moreover, the device includes data logging capabilities, enabling users to store and later review measurements. This feature is essential for compliance documentation and for analyzing trends over time. Users can download data for further analysis, aiding in thorough reporting and decision-making processes.

In addition to its core capabilities, the Bacharach 24-9448 offers flexibility with adjustable calibration settings, accommodating different gas types and concentration ranges. This adaptability ensures it can meet the specific needs of diverse applications, making it a versatile tool in the field.

Overall, the Bacharach 24-9448 is an essential instrument for professionals in various sectors. Its combination of advanced sensor technology, user-friendly design, portability, and data logging capabilities solidifies its position as a leading choice for gas detection and measurement. Whether for routine checks or emergency responses, this analyzer provides the reliability that ensures safety in potentially hazardous environments.