Baldor ISO9001 manual

Models: ISO9001

1 48
Download 48 pages 26.34 Kb
Page 3
Image 3
Manual background

ƇPlace protective covers and guards over the rotating parts, if rotating parts such as the drive shaft, pulley, belt, etc. are left exposed, they are potentially hazardous.

ƇWhen cleaning, repairing or inspecting, make sure all moving parts have stopped.

ƇPrior to working on the generator set, disconnect the spark plug and battery to prevent accidental starting.

ƇUse only original equipment or authorized replacement parts. Use of correct parts will assure the operator of the safety integrity that was designed into the unit.

ƇUnauthorized modifications to the generator set may impair the function and/or safety of the unit.

ƇDo not operate the generator set without a muffler. Inspect periodically and replace if necessary.

ƇDo not touch the hot exhaust components or the high voltage spark plug and coil terminals. While Spark Plug Voltages are not normally lethal, an involuntary jerk of the hand caused by a hot surface or by an electrical shock can result in injury.

ƇRepair of electrical generating equipment requires specialized skills. Repair personnel must have a thorough understanding of generator and small engine repair procedures.

ƇNever inhale exhaust gases. They contain carbon monoxide; a colorless, odorless and extremely dangerous gas that can cause unconsciousness or death. Symptoms of carbon monoxide poisoning can include: dizziness, nausea, headaches, sleepiness, vomiting or incoherency. If you or anyone else experiences any of these symptoms, get out into the fresh air immediately. Shut the unit down and do not operate it until it has been inspected and, if necessary, repaired.

ƇNever Operate the generator set indoors or in a poorly ventilated area such as a tunnel or cave.

ƇCALIFORNIA PROPOSITION 65 WARNING: engine exhaust from this product contains chemicals known to the state of California to cause cancer, birth defects or other reproductive harm.

ƇKnow how to stop the engine quickly and understand the operation of all controls.

-ii -

Page 3
Image 3
Baldor ISO9001 manual