Get started Charge the handset battery
If the handset require s charging, this occurs au tomatically when
the handset is placed i n the charger. For safety reas ons, the
battery is not char ged prior to shipping. We recom mend that you
charge the handset fo r at least one hour before pro ceeding
further with firs t-time registration of the hand set.
About charging …
– The charger mus t be connected to the power outlet.
– It takes four hours to f ully charge the battery.
– The maximum ta lk-time per charge is approximately 15 hours.
– Standby time per char ge is approximately 200 hours.
Battery status
The battery indi cator in the display shows the c harge level of the
handset batter y. If the batteries require ch arging, you are alerted
by a message in the disp lay and a sound signal.
To display the battery st atus …
Press while the handset is in stan dby
Turn the wheel until Battery status is shown and
press OK. The current charge level a ppears in
the display
When getting started, fo llow this
procedure:
1 Connect the charger to the
power outlet as described in th e
charger’s Guide
2 Charge the hands et battery
3 Connect t he BeoLine base as
described in the BeoLine Gu ide
4 Register th e handset to the base.
25%
50%
75%
The handset controls the batter y
charging, so you can always place
the handset in the charger after
use, even if the battery does no t
need recharging. Leaving the
handset in the charger does not
reduce the lifetime of the batter y.
OK
OK
Battery statu s
Battery statu s
=========
======
===
6