18 | Daily use |
Make and answer calls
If you end a call to or from a number not previously stored in the Phonebook, the display prompts you to do so. Refer to Store a number after a call on page
The 
key on the BeoCom 6000 is used to start and end a call. During the call, the phone displays the duration of the call and the number or name of the person called. If you do not wish to answer a call, you can mute the ringing signal.
22 for more information.
To get a dial tone before entering the number, press 
To make a call …
Enter the telephone number
To correct a digit, turn the wheel to move the cursor to the digit in question and press C to delete it
Press to make the call. The call time is shown, and if the name is stored in the Phonebook, this is shown as well
Press to end the call. Alternatively, place the handset in the charger
To answer a call …
Press to answer the call
0 – 9
98765432_
98765432
C
98765432
Time: 0:19
23456789
Time: 0:02
Press to end a call. Alternatively, place the handset in the charger
To mute a handset’s ringing …
Press to mute the ringing signal for the incoming C call. The indicator light on the handset flashes
until the caller hangs up the phone
