
14. Installation
14.6 RS232 baudrateHow to change the baudrate?
1. Press MENU to activate the Toolbar
2. Press →to select the Installation item
3. Press ↓to Pull down the Installation menu
4. Use ↑or ↓to select RS232 baudrate (image 14-9)
5. Press →to pull down the menu
6. Use ↓or ↑to select the desired baudrate
7. Press ENTER
Image14-9
14.7 SecurityWhat can be done ?
Asecurity function is implemented in the projector a nd allows a protection against theft.
AP IN code allowsth e user to lock the projector in case of wrong code entry.
ThePIN code must be entered at each start up (Power ON), entering three times a wrong number triggersa wait cycle of 15 minutes,
the second 3 wrong codes a wait cycleof 30 minutes, 1 hour, ...
The security mode can be enabled or disabled.
How to activate the security mode ?
1. Press MENU to activate the Toolbar
2. Press →to select the Installation item
3. Press ↓to Pull down the menu
4. Use ↑or ↓to select Security (image 14-10)
5. Press →to open the menu
6. Use ↑or ↓to select ON
7. Press ENTER
A dialogbox is displayed (image14-11)
116 R5976741 MGP 15 MEDICAL GRADE PROJECTOR 28/04/2004