10. Settings
10.6 Lamp mode selection

What are the different lamp modes ?

Single mode
Theprojector will always switch to the lamp with the shortest runtime when the difference between the runtimes of lamp1 and lamp
2reaches 100 hours, switching from one lamp to another happe ns only at switching on of the projector and not during operation.
Whenthe lamp fails or reaches its maximum r untime the projectorswitches a utomaticallyto the oth erla mpw ithout interrupting the
projection.The failureis logged and the lamp will never be initialized in the future.
Image10-16
Singlemode operation: switchingprinciple
Dual mode
Both lamps are working.
When onelamp fails, the projector continues the projection using the remaining lamp.

How to select the lamp mode ?

1. Press MENU to activate the Toolbar
2. Press →to select the Settings item
3. Press ↓to Pull down the menu
4. Use ↑or ↓to select Lamp
5. Press →to pull down the menu
6. Use ↑or ↓to select the mode (image 10-17)
7. Press ENTER
A bullet shows the active mode.
74 R5976741 MGP 15 MEDICAL GRADE PROJECTOR 28/04/2004