11. Tools
11. TOO LS
Overview
Source switching mode
Picture in Picture
PiP select
Add window
Remove window
PiP Lay-out
•PiPAdjust
• Background
• Logo

11.1 Source switching mode

Switching from one source to another

Tominimize undesired effects when switching from one source to another,one can use the Seamless switching mode, beside Seam-
lessswitching there is a wide choice of several effects which render the source switching transitions more enjoyable.

How to select a switching mode ?

1. Press MENU to activate the Toolbar
2. Press to select the Tools item
3. Press to Pull down the menu
4. Use or to select Source switching mode
5. Press to open the Source switching mode menu (image 11-1)
6. Press ENTER
The logo is displayed
Image11-1
TheRand om mode will select a new switching mode at each source switching i.e. there will never be 2 suc-
cessive source switchings with the same effect.
The Seamless switching mode is not used in the Random mode.

Note on Fade in/out

Insome cases, depending on the sources to be switched, the fade in/out effect is impossible or may not occur.
R5976741 MGP15 MEDICAL GRADE PROJECT OR 28/04/2004 85