5. Getting started
Image5-8
warningmessage in case of an MGP 10 projector
Thiswarning message will be repeate d at the next start up. Press BACK or MENU to remove the message.
Thetotal lifetime of the lamp for a safe operation is 1500 hours max, do not use it longer. Always replace with a same type of lamp.
Calla BARC O authorizedservice technician for lamp replacement.
When the lamp runtime reaches 1500 hours the projector switches automatically to the other lamp, being lamp2.. following mes-
sages are displayed during and after switching.
Image5-9 Image5-10
When lamp2 at its turn reaches 1470 hours, a warning message appears on the screen.
Image5-11
warningmessage in case of a MGP 10 projector
Atthe end of the lifetime of lamp2 (1500 hours) the projecto r generates an alert message.
Image5-12
Acountd own time of 4 minutes is triggered before the projector is shut down (standby).
Ifthe lamp runtime has not been reset, the alertmessage will reappear at the next start up (with again 4minutes countdown time).
Thisalert message can be escaped with MENU or BACK, but t he countdown continues.
Contact a qualified Barco technician for lamp replacement.
InDual mode the lamp end o flifetimes are rea ched at the same time, however if in dual lamp mode one lamp
hasbeen used more than the other (for example if the projector has been working temporarily in single mode),
one lamp will reach its end of lifetime sooner than the other lamp, which brings us to the Single mode oper-
ation.
5.6 Quick set up adjustments
Overview
Quick lens Adjustment
•UsingtheRCU
R5976741 MGP 15 MEDICAL GRADE PROJECTOR 28/04/2004 33