10. Signal menu
4. Use ↑or ↓to select Output frame rate.
5. Press →to pull down the menu.
6. Use ↑or ↓to select the desired frame rate.
The following choices are possible:
- synchronous : the output follows the input frame rate.
- 50 Hz: output isa lways displayed with a frame rate of 50 Hz
- 60 Hz: output isa lways displayed with a frame rate of 60 Hz
7. Press ENTER.
Image10-3
10.4 Background

Purpose

Ifthere is no signal connected to the projector, the background will be a black or a blue screen depending on the background settings.

How to change the background ?

1. Press MENU to activate the Tool bar.
2. Press →to select the Signal item. (image 10-4)
3. Press ↓to pull down the Signal menu.
4. Use ↑or ↓to select Background.
5. Press →to pull down the menu.
6. Use ↑or ↓to select the desired background.
7. Press ENTER.
Image10-4
Whenthere is nosignal connected, the projector will also start its standby timer countdown (if enabled) and
shutsdown after the predetermined time.
98 R5976815 RLMG5I PERFORMER 02/06/2006