14. Installation menu
Image14-1
Lens adjustment
Use

↑

and

↓

for zoom
Use

←

and

→

for focus
Press <enter> for SHIFT mode
Press <LOGO> or <LENS>
for test pattern
Image14-2
Lens adjustment
Use

↑

and

↓

for vertical shift
Use

←

and

→

for horizontal shift
Press <enter> for ZOOM/FOCUS
Press <LOGO> or <LENS>
for test pattern
Image14-3
14.2 Projector address
What can be done ?
In some cases the projector address must be changed, for example ifan unique RCU is used to control 2 or more projectors in a
room.
The projectoraddre sss etting onthe projector must match the setting on the RCU.

What can be changed ?

Withinthe ’Chang ePro jectorAddress’ menu, the following items can be changed
• Projectoraddress: addressdefined by the user. Can be set between 0 and 255 when controlled via RS232 and between 0 and
9whencontrolledviatheRCU
• Common address : address may be 0 or 1

How to change the projector’s address ?

1. Press MENU to activate the menu bar.
2. Press →to select the Installation. (image 14-4)
3. Press ↓to pull down the Installation menu.
4. Use ↑or ↓to select Projector address.
5. Press ENTER to confirm .
Adialog box appears onthe screen . Projector address is selected. (image14-5)
6. Press ENTER to go to the edit mode.
Themost right digit will be selected. Use the left arrow key to jump to the other digits. (image 14-6)
7. Enter an address between 0and 255 with the digit keys on the RCU and pressENTER to activate.
126 R5976815 RLM G5I PERFORMER 02/06/2006