6. Source Selection
2. Press ↓to pull down the Source Selection menu.
3. Use ↑or ↓to select S-Video.
4. Press →to pull down the submenu.
5. Use ↑or ↓to select one of the different S-Video inputs. (image 6-4)
6. Press ENTER to confirm your choice.
Awhite bullet indicates the selected S-Video source. This source will be displayed on the screen.
Image6-4
TheS-Video sources can also be selected using the video selecto r or via the dedicated key 4 on the RCU. Key
4allows to browse thro ugh the active S-Video inputs when the extended mode is checked in Video Selector.
6.7 The Video Selector
Video Selector
The Video Selector isa graphical interface which allows an overview of the different video inputs (Composite Video
andS-Video) and whether they are active (signal connected) or not as well as the selection of these different signals.

Video selector modes

The video selector has two modes:
• standardm ode : the video selectable video inputs are the standard composite video & S-Video input
• extendedmode : severalBNC connections are added and can be selected as video inputs or S-Video inputs.

How to switch the mode

1. Press MENU to activate the menu bar.
2. Press ↓to pull down the Source Selection menu.
3. Use ↑or ↓to select Video selector... .(image6-5)
Am essage willbe d isplayed and followed by a graphical user interface.
4. Use the arrow keys to select the Extended ch eck box.
5. Press ENTER to disable or enable the extended mode.
Check Extended to switch to extended mode.
Uncheck Extended to switch to standard mode.
52 R5976815 RLM G5I PERFORMER 02/06/2006