8. Image Menu
Black balance1. Press MENU to activate the menu bar.
2. Press →to select the Image item.
3. Press ↓to pull down the Image menu.
4. Use ↑or ↓to select Input balance.
5. Press →to pull down the menu.
6. Use ↓or ↑to select Black balance. (image 8-38)
7. Adjust the red black level on a minimal value (image 8-39, image8-40)
8. Adjust the blue black level on a minimal value
Note: Thisminimal value is not necessary , provided that the 2 other colors are not influencing too much the color to be adjusted,
infact the aim is to minimize the effect of the two other colors since there is a risk of reaching too soon the 50% transition
due to the contribution of these two other colors signals.
9. Adjust the Green black level until bright spots appear on the screen.
10.Adjust the Blue black level until brightspots appear on the screen.
11.Adjust the Red black level until bright spots appear on the screen.
The projected image should now be noisy full black
Image8-38
Input black balance Red
20
0127
Image8-39
Change color between Red Green and Blue with <COLOR>
Image8-40
Ifone uses a gray scale pa ttern, the bright spots should appear in the black bar.
Performing White input balance1. Connect the source you want to project.
2. Select a white pattern (or gray scale as alternative).
3. Press MENU to activate the menu bar.
4. Press →to select the Image item.
5. Press ↓to pull down the Image menu.
80 R5976815 RLM G5I PERFORMER 02/06/2006