2. Installation Guidelines

How to install the batteries

1. Push th e cover tab (A) with the fingernail a little backwards and pull upwards the cover top (B). (image 2-5)
2. Slide the cover forwards to remove. (image 2-6)
3. Push the battery body towards the spring and lift it up to remove. (image2-7)
4. Insert two AA size batteries, making sure the polarities match the + and – m arks inside the battery compartment (image 2-7).
5. Insertthe lower tab of the battery cover in the gap at the bottom of the remote control, and press the cover until it clicks in place
(image 2-6).
Image2-5
Batterycover unlock
Image2-6
Batterycover removal
Image2-7
Batteryremoval
2.7 Stacking projectors

What is possible?

Upto 2 pro jectorscan be stacked on each othe rwithout using extra too lsor accessories.

How to stack?

Handle as follow:
1. Put the second projector on the first one so that base plate of the second projector matches with the rigging socket of the first
projector. (image 2-8)
2. Turn the rigging sockets of the second projector counter clockwise until they are free to move up and down. (image2-9)
3. Securethe projectors on each other by bringing the free part of the second projector into the socket of the first projector and turn
a quarterc lockwise while pushing downwards until itclicks in.
4. Forceiling mounted configurations, mount a security cable between the lowest projector and the upper projector. (image 2-10)
Warning: Besure the safe working loud of the used security cables and connectors are enough to suppo rt one projector. Refer
to the supplier of the security cable for safety details.
R5976815 RLMG5I PERFORMER 02/06/2006 13