Toshiba RAV-SP1104ATZ-E service manual Cooling/dry operation Heating/fan operation, All operations

No.	Item	Outline of specifications		Remarks
12	Louver	1) Louver position setup		The louver position at
	control	• When the louver position is changed, the position moves necessarily		horizontal discharge
				position at under
		to downward discharge position once to return to the set position.
				SM80 differs from
		• The louver position can be set up in the following operation range.
				that at over SM110.
		In cooling/dry operation	In heating/fan operation

•In group twin/triple operation, the louver positions can be set up collectively or individually.

2)Swing setup

• [SWING] is displayed and the following display is repeated.	The swinging louver
In all operations	moves usually up to
	the ceiling side from
	the louver position of
	the set time.
(Repeats)

•In group twin operation, the louver positions can be set up collec- tively or individually.

3)When the unit stopped or the warning was output, the louver is automatically set to full closed position.

4)When PRE-HEAT (Heating ready) is displayed (Heating operation started or defrost operation is performed), heating thermo is off or self- cleaning is performed, the louver is automatically set to horizontal discharge position.

∗ The louver which air direction is individually set or the locked louver

closes fully when the unit stops and the louver is automatically set to horizontal discharge position when PRE-HEAT (Heating ready) is displayed, heating thermo is off or self-cleaning is performed.

<<Individual air direction setup>>
• Pushing UNIT LOUVER Louver select button enables every discharge port to	Setup from the
set up the air direction.	remote controller
• In case of no input (key operation) for approx. 5 seconds during setting of	without UNIT LOUVER button
	is unavailable.
individual air direction (during displaying of louver No. on the remote
controller screen), the remote controller screen returns to the normal	For the setup opera-
display screen.
	tion, refer to
• For the air direction illustration during normal operation, the air direction
	“How to set up louver
of the least No. among the louvers which are block-set is displayed.	individually” of Item
• While individual air direction is being set, the remote controller operation	“Setup at local site/
(Illustration of air direction) and operation of the real machine are linked.	Others”.

• When selecting a case,	UNIT LOUVER
	Louver select button is not pushed or	Using same as the
louver No. is not displayed, the air directions of all the louvers are
		present 4-way Air
collectively set up.
	[02]	Discharge Cassette
		Type is possible
[03]	[01]
	E-box

Refrigerant pipe

[04]

Drain pipe

– 52 –