Toshiba RAV-SP1104ATZG-E, RAV-SM1404UT-E 53, Item, Outline of specifications, Dual swing

No. Item Outline of specifications Remarks

12Louver control <<Selection of Swing mode>>

(Continued)	• For the Swing mode, the following three types of modes are			On the remote control-
	selectable and settable by keeping Swing/Direction SWING/FIX			ler before the wired
	button pushed for 4 seconds or more on the remote controller.			remote controller
	•Standard (4 pieces: same phase) swing			(RBC-AMT31E), the
				mode cannot be moved
	→ Data: [0001 (At shipment)]
				to the select mode
	When Swing operation is selected, four louvers align at the
				even if pushing	SWING/FIX
	horizontal discharge position and then start the Swing
				button for a long time.
	operation at the same time.
	‚Dual swing	→ Data: [0002]		Carry out setting
	When operation is selected, the louvers of louver No. [01]			operation during stop of
	and [03] move to the horizontal discharge position, the			the unit; otherwise the
	louvers of louver No. [02] and [04] move to the downward			unit stops operation.
	discharge position and then start the Swing operation at the			The standard swing
	same time.
				performs the same
	ƒCycle swing	→ Data: [0003]
				swing operation as the
	When operation is selected, the louver No. [01] moves to the
				present operation
	horizontal discharge position, [03] to the downward dis-			(2 series).
	charge position, [02] and [04] to the middle position and			For the setting opera-
	then start the Swing operation at the same time.
	• Three types of the swing modes can be also selected and set			tion, refer to [How to
				set up type of the
	by the setup data of Item code (DN) [F0].
				swings] in Item “Setup
	• In case of selecting the Swing mode, “Dual swing” or “Cycle
				at local site/Others”.
	swing”, the following numerals is displayed at the center of the
	remote controller screen for approx. 3 seconds when SWING/FIX			On the remote control-
	button was pushed to select [SWING].			ler before the wired
	(No display for the standard swing)			remote controller
				(RBC-AMT31E),
				flashing showing the
				Swing mode is not
				indicated.
		Alternate lighting	Alternate lighting
		(0.5 sec.)	(0.5 sec.)

Dual swing Cycle swing

<<Louver lock (Louver fix)>>
• For the air direction setup for each discharge port, the louver				On the remote control-
	position can be locked during the normal operation.			ler before the wired
• An arbitrary air direction of an arbitrary louver can be				remote controller
	registered and set by keeping UNIT LOUVER button pushed for			(RBC-AMT31E),
	4 seconds or more on the remote controller.			UNIT LOUVER button is not
• The louver lock can be set by registering the setup data to Item				provided.
				Carry out setting
	code (DN) [F1] to [F4] according to the following table.
				operation during stop
	Item code	Objective louver No.	Setup data	of the unit; otherwise
				the unit stops opera-
	F1	01	0000: Release (At shipment)
	F2	02	0001: Horizontal discharge position
			~
	F3	03
	F4	04	0005: Downward discharge position

– 53 –