Toshiba RAV-SM1104UT-E, RAV-SM1404UT-E Outline of specifications Remarks, Control outline Command

7-2. Control Specifications

No.	Item			Outline of specifications							Remarks
1	When power	1)	Distinction of outdoor unit
	supply is reset		When the power supply is reset, the outdoors are distin-
			guished and the control is selected according to the
			distinguished result.
		2)	Setting of indoor fan speed and existence of air direction
			adjustment
			Based on EEPROM data, select setting of the indoor fan								Air speed (rpm)/
			speed and the existence of air direction adjustment.								Air direction adjustment
2	Operation	1)	Based on the operation mode selecting command from the
	mode selection		remote controller, the operation mode is selected.
			Remote controller					Control outline
				command
				STOP		Air conditioner stops.
				FAN		Fan operation
				COOL		Cooling operation
				DRY		Dry operation
											Ta: Room temp.
				HEAT		Heating operation
											Ts: Setup temp.
				AUTO		• COOL/HEAT operation mode is
							automatically selected by Ta, Ts				To: Outside temp.
							and To for operation.
						• The operation is performed as
							shown in the following figure
							according to Ta value at the first
							time only. (In the range of Ts +
							α –1 < Ta < Ts + α + 1, Cooling
							thermo. OFF (Fan)/Setup air
							volume operation continues.)
							Cooling
			+1.0				operation
							Cooling thermo. OFF (Fan)
				Ta
				(˚C) Ts + α			• Setup air volume
			-1.0
							Heating
							operation
			• α is corrected according to the outside temperature.
				Outside temp.			Correction value (α)
											k = deg
				No To				0K
				To ≥ 24°C				–1K
				24 > To ≥ 18°C				0K
				To < 18°C				+1K
				To error				0K
3	Room temp.	1)	Adjustment range: Remote controller setup temperature (°C)
	control
					COOL/DRY			HEAT		AUTO
				Wired type		18 to 29		18 to 29	18 to 29
				Wireless type		18 to 30		16 to 30	17 to 27

– 46 –