Kenwood manual KRF-X9992D Specifications

Specifications

Chapter Three : Warnings and Specifications

NOTE: Do not use contact cleaning agents because they could cause a malfunction. Be especially careful not to use contact cleaning agents containing oil, since they may deform the plastic components.

Kenwood follows a policy of continuous advance- ments in development. For this reason, specifica- tions may be changed without notice.

Full performance may not be exhibited in extremely cold locations (below 0 deg. C).

42

Chapter Three: Specifications

Read this page carefully to ensure safe operation.

KRF-X9992D Specifications

Audio Section

Rated Output Power during stereo operation

63 Hz ~ 12.5 kHz, 0.7 % T.H.D. , 6 Ω (DIN/IEC)

...........................................................................	130W + 130 W
Effective Output Power during surround operation
Front
1 kHz, 0.06 % T.H.D. at 6 Ω, one channel driven
..........................................................................	130 W + 130 W
Center
1 kHz, 0.06 % T.H.D. at 6 Ω, one channel driven		........ 130 W
Surround
1 kHz, 0.06 % T.H.D. at 6 Ω, one channel driven
..........................................................................	130 W + 130 W
Total Harmonic Distortion	0.004 % (1 kHz, 65 W, 6 Ω)
Frequency Response (IHF’66)
CD1	5 Hz ~ 80 kHz, +0.5 dB, -3 dB
Signal to Noise Ratio (IHF ‘66)
Phono (MM)		76 dB
CD1		96 dB
Input Sensitivity / ....................................................Impedance	2.5 mV / 47 kΩ
Phono (MM)
CD1	200 mV / 47 kΩ
6ch input	200 mV / 47 kΩ
Output Level /...........................................................Impedance	200 mV / 220 Ω
Tape Rec
Pre Out (Front, Center, Surround, Subwoofer)		1 V / 500 Ω
Tone Control
Bass	+ 7 dB (at 100 Hz)
Treble	+ 7 dB (at 10 kHz)
Loudness Control
Volume at -40 dB level	+7 dB (100 Hz), +4 dB (10 kHz)

Digital Audio Section

Sampling Frequency	............................ 32 kHz, 44.1 kHz, 48 kHz
Input Level / Impedance / Wavelength
Optical	-15 dBm ~ -21 dBm, 660 nm +30 nm
Coaxial	0.5 Vp-p / 75 Ω
Output Level / Impedance / Wavelength
Optical	-15 dBm ~ -21 dBm, 660 nm +30 nm

Audio-Video Receiver KRF-X9992D

Video Section

Video Inputs / Outputs		Vp-p / 75 Ω
Video (composite)	1
S Video ( luminance signal)	1	Vp-p / 75 Ω
(chrominance signal)	0.286	Vp-p / 75 Ω

FM Tuner Section

Tuning Frequency Range			87.5 MHz ~ 108 MHz
Usable Sensitivity (DIN)
Mono	1.2 ∝V (75 Ω) / 13.2 dBf (40 kHz dev., S/N 26 dB)
Stereo	45 ∝V (75 Ω) / 44.2 dBf (46 kHz dev., S/N 46 dB)
Total Harmonic Distortion (DIN at 1 kHz)
Mono			0.2 % (65.2 dBf input)
Stereo			0.8 % (65.2 dBf input)
Signal to Noise Ratio (DIN weighted, 1kHz)
Mono		65 dB (40 kHz dev., 65.2 dBf input)
Stereo		60 dB (40 kHz dev., 65.2 dBf input)
Stereo Separation (DIN at 1 kHz)			...................................... 36 dB
Selectivity (DIN, +300 kHz)			64 dB
Frequency Response		30 Hz ~ 15 kHz, +0.5 dB, -3.0 dB

MW (AM) Tuner Section

Tuning Frequency Range	531 kHz ~ 1,602 kHz
Usable............................................................................Sensitivity (30 % mod., S/N 20 dB)	16 ∝V / (600 ∝V/m)
Signal to Noise Ratio (30 % mod. 1 mV input)		50 dB

General

Power consumption	...........................................................	600 W
AC outlet
Switched	2 (total 100 W max.)
Dimensions	W : 440 mm (17-5/16”)
	H : 162 mm	(6-3/8”)
	D : 391 mm	(15-3/8”)
Weight (Net)	15.2 kg (33.5 lb)