Chapter One : Connecting Your Devices
Do not plug in the receiver to AC power until you have connected all your devices.
This section focuses on the connections from your VCR to the
The instructions in this section show one of several possible variations on connecting your VCR. For further assistance on optional configurations, contact the store where you purchased your receiver.
Connecting Your VCR(s), continued
To Connect a Primary VCR:
1.Review the information under “Before You Begin” on pageÊ 1. It contains important notes about the types of video connections you can make.
2.Connect the audio and video cables from the VCR’s Audio and Video jacks to the receiver’s VIDEO 1 REC OUT and PLAY IN jacks as shown to the left.
3.Be sure to connect the VCR Video IN cable to the jack labeled REC OUT and the VIDEO OUT cable to the jack labeled PLAY IN.
4.Go to “Noting Your Devices” on pageÊ 3 and note which jack you used to connect your VCR. In addition, note the brand name and model number of the VCR.
Audio-Video Receiver KRF-X9992D
To Connect a Secondary VCR:
1.Review the information under “Before You Begin” on pageÊ 1. It contains important notes about the types of video connections you can make.
2.Connect the audio and video cables from the VCR’s Audio and Video jacks to the receiver’s VIDEO 2 REC OUT and PLAY IN jacks.
3.Be sure to connect the VCR Video IN cable to the jack labeled REC OUT and the VIDEO OUT cable to the jack labeled PLAY IN.
4.Go to “Noting Your Devices” on pageÊ 3 and note
which jack you used to connect your VCR. In |
|
addition, note the brand name and model |
|
number of the VCR. | 13 |
|
Connections
