Kenwood KRF-X9992D manual Troubleshooting

Sound

5.Touch to return to the Setup Preference menu; touch to return to the previous menu.

There wasn’t any sound recorded on tapes made on my VCR or tape deck

Check that:

•The audio cables are connected properly for the device.

•Analog has been set as the input type. Digital input cannot be used as source for recording to analog media (such as VHS or audio tape). See “Switching to Analog Input” on pageÊ 21.

The initial sound is intermittent or non-existent when I start to play from a Dolby Digital DVD source

•Some DVD players simply have intermittent start-up sound.

•Check that the correct digital cable is being used. The cable must be a digital coaxial or optical cable. See Chapter One of the Connections and Setup Guide.

With a Dolby Digital program, the loud sounds aren’t very loud and the quiet sounds aren’t very quiet

Check that volume extremes are not automatically being bal- anced. See “Midnight Theatre Function” on pageÊ 15 of this manual.

Troubleshooting

Audio-Video Receiver KRF-X9992D 75