How Do I Replace a Setup Code with a New One?

Chapter Two : Setting Up PowerTouch

How Do I Replace a Setup Code with a New One?

If you purchase a new device to replace an existing device, you will need to identify the new device to PowerTouch. To do so:

1.Connect the device as described in the appropri- ate section of Chapter One in this guide.

2.Follow the steps under “How Do I Identify Devices?” on pageÊ 37. When you touch it will replace the other code.

How Do I Delete Setup Codes?

If you disconnect a device and do not plan to replace it, you may want to delete the setup code from PowerTouch. To do so:

1.Follow the steps under “How Do I Identify Devices?” on pageÊ 37 to select a jack set.

2.Touch . Scroll to the device “Nothing” then touch it. That device is no longer controlled by PowerTouch.

What if my device does not work with any of the codes on the list?

What if I Want PowerTouch to Control Additional Functions?

PowerTouch contains sophisticated features that allow it to “learn” new commands from other IR remotes. If none of the codes for the device and brand you select work, use this feature to instruct PowerTouch how to operate the device.

You can also use this feature to modify commands for codes that do work or even to add extra func- tionality to those codes.

For example, let’s say the basic control codes for your VCR are Power, Play, Rewind, Fast Forward,

Pause, Channel and Record. Let’s also say that your VCR has an OSD (On Screen Display) menu that is not part of the default code set you chose. You can use your VCR’s remote to teach PowerTouch to access that menu.

To teach PowerTouch new commands:

1.Follow the steps under “How Do I Identify Devices?” on pageÊ 37. Pick any code for the device brand; PowerTouch must have a code to learn device commands.

2.Touch to open the Function Change menu:

3.Touch an empty button (1 to 8).

You will be able to access these new commands by touching More or the button you assign on any device control screen. (Users’ Guide)

4.Touch and use the “keyboard” and the stylus to enter a command name (e.g., CD: On).

Touch on the keyboard to save the name

and touch .

5.Aim the device’s remote at PowerTouch and press and hold the button on the device’s remote that corresponds to the command you want PowerTouch to learn: