Receiver/Tuner
When I press a key to tune to a preset station, the receiver does not respond
Check whether:
•The receiver has been unplugged for more than three days. If it has, your settings were cleared from the receiver’s memory. See “My receiver won’t turn on and the STANDBY indicator is flashing” on pageÊ 79 of this manual.
•The Tuner input is selected. See “Tuner” on pageÊ 50 of this manual.
Macro is not running as I programmed.
•Because PowerTouch can only transmit one command at a time, stagger the timings of the various macro settings so that the commands are given at different times.
•On or Off command for audio devices may not work cor- rectly if they are not Kenwood components connected via system control cables.
•On or Off command for TV monitor may not work correctly. If it is already on, On command turns it off, and if it is already off, Off command turns it on.
When the listen mode is in “6ch Input”, there are commands which the receiver does not accept.
•When in “6ch Input” mode, the commands such as selecting a different listen mode, Speaker A/B switching, CD2/TAPE2 MONITOR switching, sound adjustment and speaker level adjustment.
Troubleshooting
83 |
