
Troubleshooting
Video/PowerTouch
I hear a hum when I select the PHONO input
Check that:
•The audio cables are connected securely to the Phono jack set. See Chapter One of the Connections and Setup Guide.
•The turntable is grounded on the receiver. See Chapter One of the Connections and Setup Guide.
Video
I can’t see the program I’m playing on the TV
There wasn’t any video output to my VCR when I recorded
•Check that the video source and TV are connected via the same type of connectors.
•Check that the correct video input on the TV is selected.
•Check that the video software you record does not have copy guard protection.
PowerTouch
I don’t see icons for all my devices
You must identify devices for PowerTouch control for them to appear in the icon bar on PowerTouch. See Chapter Two of the Connections and Setup Guide.
When I select a device icon, I don’t see any commands
•When you start PowerTouch for the very first time, all the possible icons appear. If you select any of them, there will be no commands in the command area. You must set up PowerTouch before you can begin controlling devices. See Chapter Two of the Connections and Setup Guide.
76 |