How Do I Operate Devices?
4.If you haven’t already done so on the CD changer, touch
. This reads all of the disc and track title information into the CD changer’s memory.
5.Set PowerTouch down so that its IR transmitter window is
aiming at the receiver’s IR transmitter window. Select 
. Do not move PowerTouch while it is reading data.
This process may take some time, depending on how many CDs you have loaded. When the IR light on the receiver goes out, the receiver is done sending the information to PowerTouch, and you may move PowerTouch again. PowerTouch’s memory now contains the disc titles of every CD in the changer with title information.
6.Touch 
to return to the CD controls.
|
|
| i c | |
|
| u | s | |
7. Touch | m | on Quick Access menu to return to the Music | ||
| ||||
|
| |||
menu. |
|
|
|
To read the loaded track titles and store them in PowerTouch:
1.Make sure you have followed the previous instructions to read disc data.
2. Touch 
on the main or Quick Access menu.
3. Touch 
.
4. If you haven’t already done so on the CD changer, touch
. This reads all of the disc and track title information
into the CD changer’s memory. Touch 
to return to the CD controls.
Using PowerTouch
39 |
