Toshiba RAV-SP1404AT-E, RAV-SM1404UT-E, RAV-SM1104UT-E service manual 139, † Drain cap 1. Detachment

No. Part name Procedure Remarks

†Drain cap 1. Detachment

	1) Carry out work of item 1 of •.			Drain cap (outside)
	2) Loosen screws (3 positions) fixing the drain
	cap (outside) and then turn the drain cap to
	the arrow mark direction to remove it.
	NOTE :		CLOSE
	The drain cap is hung down because a strap
	is attached to it (outside).
			OPEN
	3) Loosen the cap by turn the drain cap
	(inside) for approx. 1 turn to OPEN →
	direction and then drain the drain water
	accumulated in the drain pan.
			Strap		Drain cap fixing screws
	NOTE :
	Be sure to catch drain water using a bucket,			Drain cap (inside)
	etc. when loosening the drain cap.
	The insulating materials are adhered to the
	drain cap (outside) and opening part of the
	drain pan; be careful that they are not come off.
	If they are come off, stick them as before
	using double-faces tape, etc.		CLOSE
	4) Turn the drain cap once again to OPEN
	→ direction to remove it.		OPEN
2. Attachment			Drain cap	mark	Drain pan mark
	1) Insert the drain cap (inside), turn it to
	CLOSE → direction until the position
	where “Clashed sound” is heard and it
	cannot be turned more over
	(Position where	mark of the drain pan
	matches with	mark of the drain cap
	(inside)) and then fix it.

NOTE :

When attaching the drain cap (inside), remove dirt attached to the packing.

And tighten in it noting so that the cap is not slantingly set.

If attaching the drain cap as dust or dirt is attached or the cap is set slantingly, water leakage is caused.

2)Turn the drain cap (outside) to → direction and then attach it using the fixing screw as original.

3)Following to work of item 2 of •, mount the suction grille as before.

– 139 –