9. Tools Menu

PiP dedicated buttons

PiP Adjust : this button allows to focus on one particular window, this window is shown with a white frame surrounding the
selected window.
As ource identificationbox is displayed in the right lower corner.
Image9-2
PressPiP Adjust button to move the frame to the next window. Thiscan also be done via PiP Adjust in the Tools menu.
PiP:this button allows to browse through the different configurations, it has the same function as PiP select in the Tools menu.
Sincethere is only one deco der,when in 2-by-2 configuration, and only video 1 is di splayed, this source will
be duplicated at the same position as SDI.
9.3 PiP select
What is possible ?
With PiP selectit is possible to switch from one layout to another.
ThePiP co nfiguration can also be selected via the dedicated PiP key on the RCU.

How to change the PiP configuration ?

1. Press MENU to activate the menu bar.
2. Press to select the Tools item.
3. Press to pull down the Tools menu.
4. Use or to select PiP select.
5. Press to pull down the menu.
6. Use or to select the desired configuration. (image 9-3)
7. Press ENTER.
A white bullet shows the active layout.
R5976815 RLM G5I PERFORMER 02/06/2006 87