Figure 4
User | Assigned Outlets | |||
| 1 2 3 4 |
user3 N N Y Y
1)...Add Outlet(s)
2)...Remove Outlet(s)
3)...Add All Outlets
4)...Remove All Outlets
Manage Users
Select “Manage Users,” from the main menu allows the admin user to add and delete users, change passwords, and change the outlet list that determines an outlet user’s access to prescribed outlets. The following menu appears:
Add User:
Add a user. If the “Add user” option is NOT present than the maximum number of users have been assigned. You may get a message saying ‘No more users can be added’.
NOTE: A new user does not get a password until they are logged in, then type ‘password’ at the prompt to add a password to the user.
Delete User:
Select this option to delete a user’s access to this unit.
Rename User:
Select this option to change the name of a currently assigned user.
Add Outlet(s), adds individual outlets to the user.
Remove Outlet(s), removes individual outlet from the user.
Add All Outlets, Adds all outlets to the user.
Remove All Outlets, removes all outlets from user.
Change Outlet Name
Select this option to change the outlets name.
Enable/Disable Confirmation
If the enable/disable feature is disabled, the DS will not ask to confirm the command.
Enable/Disable Status Menu
Select this option to enable the Status menu.
Change Unit ID
Select this option to change the Unit ID.
Change Alarm Threshold
The Current Alarm Threshold allows the user to set the level of current required to sound the internal alarm. This setting is only available on units with current monitoring circuitry.
9
