DS-RPC Manual

QUICK START: DS-RPC

by Bay Technical Associates

For those Administrators who have requested the bare minimum for this type of equipment, follow these steps exactly. If this is a new unit shipped directly from Baytech, follow the steps. If this is a previously own unit, perform a factory reset to clear out any users and passwords still in the unit.

RPC Controller Configuration:

Before continuing your System Administrator needs to tell you to use DHCP or give you an IP Address, Subnet Address, and Gateway Address.

1.Connect the 9FRJ45PC-4 or 9FRJ45PC-1 adapter to your PC.

2.Connect the supplied rollover flat cable RJ08X007 to the adapter and to the EIA232 serial port on the Baytech HOST Module.

3.Use terminal emulation software to access the unit, (i.e. Microsoft Hyper-terminal). Set the PC serial port configuration to the following: 9600 bps, 8 data bits, 1stop bit and no parity.

4.If you get only a blinking cursor Press ‘Enter’. If still only a blinking cursor, Type 5 semi-colons (;),The Attention Character will not echo on the screen. There is a one second delay before the menu is displayed. You should see a menu similar to (Figure 1).

5.Select ‘DS-RPC’ and type ‘config’ at the prompt for the configuration menu. You should see a menu similar to (Figure 2).

6.Select Manage Users. You should see a menu similar to (Figure 3)

7.IMPORTANT NOTE: the first user added will be the ADMIN user. Type ‘A’ and press ‘Enter’. Type the name of the admin user. The name is case sensitive.

8.Select the number of the user. You should see a menu similar to (Figure 4).

9.Select ‘Add Outlet(s)’ to add a few outlets (i.e. 1,2,4) and press ‘Enter’ or select ‘Add All Outlet’. A ‘Y’ signifies the outlet has been assigned to the user.

10.Press ‘Enter’ Repeat steps 6 thru 9 to add other users.

11.Press ‘Enter’ until get to the Host module network menu (Figure 1).

At this point you have enough basic configurations needed to operate the RPC part of the DS- RPC unit.

Serial Setup

•Connect the 9FRJ45PC-4adapter to the user’s computer

•Connect the Host Module’s EIA-232 port to the adapter via the RJ08X007 rolled flat ribbon cable.

•Use terminal emulation software to access the unit, 9600 bps, 8 data bits, 1stop bit and no parity.

NOTE: At any time during the session you need to go to another menu, use the Attention Character = semi-colon (;). Press the attention character key 5 consecutive times to get back to the main status menu.

NOTE: User Name and Password feature is case sensitive. Default is ‘root/baytech’, If the DS- RPC login is enabled, the default User Name is ‘admin’, password is ‘baytech’ lower case or

‘BTA’ upper case.

7

Page 6 Page 8
Page 7
Image 7
Bay Technical Associates DS2-RPC, DS4D-RPC manual Quick Start DS-RPC, ‘BTA’ upper case
Page 6 Page 8

DS4D-RPC, DS2-RPC specifications

Bay Technical Associates (BTA) has significantly contributed to the technical communication landscape with its innovative products, such as the DS4D-RPC and DS2-RPC systems. These products are designed to address the needs of various industries, enhancing data transmission and communication effectiveness.

The DS4D-RPC is a state-of-the-art data service platform that operates at a high capacity, providing seamless communication channels within complex systems. Its main feature is the ability to handle multiple types of data streams simultaneously, which makes it ideal for environments where bandwidth and speed are critical. The platform supports high-density data connections, ensuring that organizations can transmit and receive large volumes of information without lag.

On the other hand, the DS2-RPC is tailored for lower-demand applications where efficiency and reliability are paramount. While it may not offer the same throughput as the DS4D-RPC, the DS2-RPC is designed for stability, making it suitable for applications in remote areas or for organizations with limited bandwidth. One of its key characteristics is its energy efficiency, which can greatly reduce operational costs while maintaining reliable communication.

Both systems utilize robust transmission technologies, including advanced modulation techniques that help optimize data flow and reduce interference. They support various communication protocols, ensuring compatibility with existing infrastructure. This flexibility allows organizations to integrate these systems into their current setups smoothly.

Scalability is another significant feature of both the DS4D-RPC and DS2-RPC. They can easily be expanded to accommodate growing data needs, making them a future-proof investment for businesses looking to stay ahead of technological advancements. Users can mix and match components to tailor their systems to specific operational demands.

Furthermore, both products prioritize security. They incorporate encryption protocols to safeguard data integrity and protect against unauthorized access. This feature is crucial in today’s data-centric environment, where cyber threats are prevalent.

In summary, Bay Technical Associates' DS4D-RPC and DS2-RPC systems represent a leap forward in data communication technology. Their combination of high capacity, reliability, energy efficiency, scalability, and security makes them pivotal in transforming how organizations handle data transmission across various sectors.
Top Page Image Contents