Bay Technical Associates DS2-RPC, DS4D-RPC manual Opening Menu Status

DS-RPC Manual

Opening Menu Status

IMPORTANT: The Factory default serial communications parameters are 9600 bps, 8 data bits, 1 stop bit, and no parity.

NOTE: The configuration menu is dependent on the specific host module installed.

If you have a proper connection to the unit upon power-up or unit reset, you should see something similar to the following with the status menu:

Data Switch Series - F.3.10.4 (C) 2000 DS72 Bay Technical Associates Unit ID: DS72 Network Interface

Enter username>admin
Enter password>******
Module:
Attention Character: ]
Device A	1
Device B	2
Device C	3
Device D	4
DS-RPC	5
Configure	C
Status	S
Unit Reset	RU
Logout	T
Enter Request :5

NOTE: to get to the DS-RPC menu you may select the ‘C-Configuration’ option from the main menu or select the DS-RPC option and then type ‘config’ at the prompt.

DS-RPC Series

(C)2001 by BayTech

F2.03

Option(s) Installed:

True RMS Current

Internal Temperature

True RMS Voltage

If a Managed User has been added, the unit will ask for user name.

11