By responding to the Enter Request: message at the end of the V93A menu with “M” you receive a response similar to the following:
Device A | (2,1) | 1 |
Device B | (2,2) | 2 |
Device C | (2,3) | 3 |
Device D | (2,4) | 4 |
Device A | (3,1) | 5 |
Device B | (3,2) | 6 |
Device C | (3,3) | 7 |
Device D | (3,4) | 8 |
Configure | C | |
Manual Mode | M | |
Exit | X | |
Unit Reset | R | |
Logout | T | |
Enter Request: | M |
|
Enter Module number: 2
Enter Port number (<CR> for none): 3
By entering “2” at the Enter Module number and entering “3” at the Enter Port number, the user has selected module number 2 and port number 3. Verify the connection by insuring that the red LED of Port 3, Module 2 on the front panel of the
.4 EXIT
By responding to the Enter Request: message in the V93A Status & Diagnostics Menu with “X” (Exit), you will exit the V93A Status & Diagnostics Menu. The V93A host module will respond with a menu that is similar to the following:
.1 | > X |
14
