Bay Technical Associates U140E116-02 owner manual Port Device Name

If you type "Y", the new configuration for the selected port is stored permanently in non-volatile memory until. If you type “N” the V93A will return to the main configuration menu.

NOTE: If you are configuring the V93A from the EIA-232 port, the V93A will respond with:

Change Device to NEW Configuration

Before Answering This Request.

CAUTION: This message reminds you to change the serial port configuration of the host device now. If they do not match, the V93A will be unable to interpret the next command. If this happens, cycle power on the M- Series DAC and reconfigure the unit.

.3 PORT DEVICE NAME

By responding with "3" (Port Device Name), you can change the Port Device Name. The V93A module will respond with a menu similar to the following:

Module 1 Device Name :
+	----+	-----------	+-----	+-----	+----	+	------+-----	+---	+
Port		Device	Baud	Word	StopParityXon/Xoff
		Name	Rate	Size	Bits		XmitRecv
+	----+	-----------	+-----	+-----	+----	+	------+-----	+---	+
	1 Device D		9600	8	1 None Off Off
+	----+	-----------	+-----	+-----	+----	+	------+-----	+---	+
		Enter Port Device Name (Max. 16 characters):
		or ENTER for no change			...........		:

Enter the desired Port Device Name up to 16 characters. For example, if you type "PORT 4" followed by <ENTER>, the module will respond with:

Module 1 Device Name :
+	----+	-----------	+-----	+-----	+----	+------	+-----	+---	+
Port		Device	Baud	Word	StopParityXon/Xoff
		Name	Rate	Size	Bits		XmitRecv
+	----+	-----------	+-----	+-----	+----	+------	+-----	+---	+
	1 Port 4		9600	8	1 None Off Off
+	----+	-----------	+-----	+-----	+----	+------	+-----	+---	+

19