ASSEMBLY INSTRUCTIONS
READ ALL SAFETY WARNINGS & ASSEMBLY INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR OPERATING YOUR COOKER. Inspect contents in the box to ensure all parts are included and undamaged.
FOR MISSING PARTS OR ASSISTANCE, PLEASE CALL
Proof of purchase will be required.
Model #DB250
TOOLS REQUIRED: PARTS INCLUDED:
Adjustable Wrench
1- Frame Phillips Head Screwdriver
2 - BG10 Burners | 1- Regulator | 4- PC. Extension 4- Long Bolts 4- Wing Nuts |
with Air Shutter | ||
& Locking Nut | Hose Assembly | Leg Set |
1.Remove components from the box and packing. Turn base frame upside down. Assemble cooker while in this upside down position.
2.Attach Burners to Crossbar - Remove locking nut from bottom of burners. Turn burner upside down. Line up burner bolt to hole in crossbar.
Insert the bolt through the crossbar. Attach locking nut and wrench tighten.
3.Attach Extension Legs to Base Frame - Slide legs on frame to match holes at top of extension leg. Insert long bolt and tighten with wing nuts.
NOTE: After attaching legs, return frame to upright position.
4.Attach Hose to Burner - Refer to Hose Regulator Attachment Instructions
on pages 12 - 13. NOTE: Do not over tighten brass hose connector to burner. The air control shutter must be able to easily turn for adjustment of flame quality. If you over tighten the brass hose connector to the burner and the air shutter cannot turn, then unscrew the brass hose connector until the shutter can be easily turned... Very Important!
ASSEMBLED
UNIT
Model #DB375
TOOLS REQUIRED:
Adjustable Wrench
Phillips Head Screwdriver
PARTS INCLUDED:
1- Frame
2 - BG12 Burners | 1- Regulator | 4- PC. Extension 4- Long Bolts 4- Wing Nuts | |
with Air Shutter | |||
Hose Assembly | Leg Set | ||
& Locking Bolt | |||
|
|
1.Remove components from the box and packing.
Turn base frame upside down. Assemble cooker while in this upside down position.
2.Attach Burners to Crossbar - Remove locking bolt from bottom of burners. Turn burner upside down. Line up burner to hole
in crossbar. Insert the bolt through the crossbar and screw into burner. Wrench tighten.
3.Attach Extension Legs to Base Frame - Slide legs on frame to match holes at top of extension leg. Insert long bolt and tighten with wing nuts. NOTE: After attaching legs, return frame to upright position.
4. Attach Hose to Burner - Refer to Hose Regulator Attachment Instructions
on pages 12 - 13. NOTE: Do not over tighten brass hose connector to burner. The air control shutter must be able to easily turn for adjustment of flame quality.
If you over tighten the brass hose connector to the burner and the air shutter cannot turn, then unscrew the brass hose connector until the shutter can be easily turned... Very Important!
9
