Connecting and Configuring your Router

2.7Verifying Hardware Connections

The Setup Assistant will now verify your hardware connection.

2.8Naming your Wireless Network

The Setup Assistant will display the default wireless network name or Service Set Identifier (SSID). This is the name of your wireless network to which your computers or devices with wireless network adapters will connect. You can either use the default or change it to something unique. Write down this name for future reference. Click “Next” to continue.

2.9Requesting Internet Account Info (if needed)

If your Internet account requires a login and password, you will be prompted with a screen similar to the illustration below. Select your country or ISP from the drop- down boxes.

2.10Configuring the Router

The Setup Assistant will now configure your Router by sending data to the Router and restarting it. Wait for the on-screen instructions.

Note: Do not disconnect any cable or power off the Router while the Router is rebooting. Doing so will render your Router inoperable.

2.11Checking Internet Connection

We are almost done. The Setup Assistant will now check your connection to the Internet.

1

2

3

4

5

6

7

8

9

10

11

section

11

Page 13
Image 13
Belkin F5D7632EA4A user manual Section