Belkin F5D7632EA4A user manual Setting your Connection Type to Dynamic IP 1483 Bridged

Manually Configuring your Router

5.VPI/VCI — Enter your Virtual Path Identifier (VPI) and Virtual Circuit Identifier (VCI) parameter here. (Assigned by your ISP).

6.Encapsulation — Select your encapsulation type (supplied by your ISP) to specify how to handle multiple protocols at the ATM transport layer. VC-MUX: PPPoA Virtual Circuit Multiplexer (null encapsulation) allows only one protocol running per virtual circuit with fewer overheads. LLC: PPPoA Logical Link Control allows multiple protocols running over one virtual circuit (more overhead).

7.Dial on Demand — By selecting “Dial on Demand”, your Router will automatically connect to the Internet when a user opens up a web browser.

8.Idle Time (Minutes) — Enter the maximum idle time for the Internet connection. After this time has been exceeded, the connection will be terminated.

9.MTU — The MTU setting should never be changed unless your ISP requires a specific MTU setting. Making changes to the MTU can cause problems with your Internet connection, including disconnection from the Internet, slow Internet access, and problems with Internet applications working properly.

1

2

3

4

5

6

7

8

9

10

11

section

Setting your Connection Type to Dynamic IP (1483 Bridged)

This connection method bridges your network and ISP’s network together. The Router will obtain an IP address automatically from your ISP’s DHCP server.

19