Belkin F5D7632EA4A user manual Rear Panel, Resetting the Router, Restoring the Factory Defaults

Knowing your Router

Rear Panel

The following figure illustrates the rear panel of your Router.

(6)(9) (8) (7)

������������������������������������� ����������

1

2

3

4

section

�����

������������

5

6

Power Plug — Connect the included power supply to this inlet. Using the wrong type of power adapter may cause damage to your Router.

Ethernet Ports —The Ethernet ports are RJ45, 10/100 auto-negotiation. The ports are labeled 1 through 4. These ports correspond to the numbered LEDs on the front of the Router. Connect your network-enabled computers or any networking devices to one of these ports.

ADSL Line —This port is for connection to your ADSL line. Connect your ADSL line to this port.

Reset Button —The “Reset” button is used in rare cases when the Router may function improperly. Resetting the Router will restore the Router’s normal operation while maintaining the programmed settings. You can also restore the factory default settings by using the “Reset” button. Use the restore option in instances where you may have forgotten your custom password.

a. Resetting the Router

Push and hold the “Reset” button for one second then release it. When the “Power/Ready” light becomes solid again, the reset is complete.

b. Restoring the Factory Defaults

Press and hold the “Reset” button for 20 seconds then release it. When the “Power/Ready” light becomes solid again, the restore is complete.

7

8

9

10

11

7