Belkin F5D7632EA4A user manual DNS Domain Name Server Settings

Manually Configuring your Router

Setting your Connection Type to Modem Only (Disable Internet Sharing)

In this mode, the Router simply acts as a bridge passing packets across the DSL port. It requires additional software to be installed on your computers in order to access the Internet.

(1)

(2)

1.VPI/VCI — Enter your VPI and VCI parameter here. (Assigned by your ISP).

2.Encapsulation — Select LLC or VC MUX. (Assigned by your ISP).

DNS (Domain Name Server) Settings

A “Domain Name Server” is a server located on the Internet that translates Universal Resource Links (URLs) like “www.belkin.com” to IP addresses. Many ISPs do not require you to enter this information into the Router. The “Automatic from ISP” box (1) [Designer: call this out in screenshot below] should be checked if your ISP did not give you a specific DNS address. If you are using a static

IP connection type, then you may need to enter a specific DNS address and secondary DNS address for your connection to work properly. If your connection type is dynamic or PPPoE, it is likely that you do not have to enter a DNS address.

Leave the “Automatic from ISP” box checked. To enter the DNS address settings, uncheck the “Automatic from ISP” box and enter your DNS entries in the spaces provided. Click “Apply Changes” (2) [Designer: call this out in screenshot below] to save the settings.

1

2

3

4

5

6

7

8

9

10

11

section

(1)

(2)

21