Belkin F6C1000-EUR, F6C700-EUR, F6C1400-EUR user manual Rear Panel

P73335u_UPS_man.qxd 4/30/01 12:19 PM Page 7

Introduction (continued)

ON BATTERY LED: Indicates the UPS is supplying the load from the battery power.

En

REPLACE BATTERY: Indicates the UPS battery is no longer useful and must be replaced immediately.

BATTERY LEVEL LED: Displays the remaining percentage of battery capacity (25%, 50%, 75%, and 100%).

2-6 Rear Panel

OUTPUT RECEPTACLES: The UPS supplies AC power to the load via these receptacles.

BREAKER: This is used to prevent high-input current from reaching the UPS.

INPUT RECEPTACLE: AC input utility power supplies to the UPS via the receptacle.

SNMP SLOT: A SNMP adapter can be plugged into this port for managing UPS on the network.

TVSS SURGE PROTECTOR: This connector is used for protecting the transmission line of the Ethernet card from surges, line-noise, and spikes.

COMMUNICATION INTERFACE (RS-232/DRY CONTACT): The communication port is used to allow the PC and the UPS to communicate. Please refer to section 8 for more information.

7