Appendix (continued)
Steps for IBM Aptiva
NOTE: The steps for this computer are not included in the document received in the box.
1.While the computer is booting, follow the directions on the screen: Press F1 to enter Setup.
2.Follow the legend on how to scroll through the Setup options until you reach Input/Output Ports.
3.Select Parallel Port Mode.
4.Select ECP.
5.Press ESC twice.
6.Press ENTER to save the setting and exit Setup.
Micron
General Steps
1While the computer is booting, follow the directions on the screen: Press F2 to enter Setup.
2.Select Advanced from the menu bar.
3.Follow the legend directions to select Integrated Peripherals.
4.Use the
5.Select the parallel port mode with the highest performance (e.g. ECP).
6.Follow the legend directions to save the setting and exit Setup.
Steps for the Millennium, Phoenix BIOS v 4.05
NOTE: The steps for this computer are not included in the document received in the box.
1.While the computer is booting, follow the directions on the screen: Press F2 to enter Setup.
2.Go to Connectivity.
3.Change Port from AT to ECP.
4.Select PS/2.
Packard Bell
General Steps
1While the computer is booting, follow the directions on the screen: Press F2 to Enter Setup. (It might be F1 on some models.)
2.Select Advanced from the menu bar.
3.Follow the legend directions to select Integrated Peripherals (or Peripheral Configuration on some models).
4.Choose the parallel port mode with the highest performance (e.g. ECP).
5.Follow the legend directions to save the setting and exit Setup.
Steps for the Force 443 CD, AMBIOS BIOS v 1.00.12.1313oe
1While the computer is booting, follow the directions on the screen: Press F1 to Enter Setup.
2.Select Advanced from the menu bar.
3.Use the
4.Use the
5.Use the
6.Press F10 to save the setting.
31
